Dri-Eaz Protimeter SurveyMaster Moisture Meter (F522) Dri Eaz Lower Prices

Product Overview

Built for water damage restoration and remediation professionals, the Dri-Eaz Protimeter SurveyMaster Moisture Detector searches for the presence of moisture in various building materials including drywall, wood, siding, tile, insulation, and carpeting. Designed with 2 technologies in 1, this non-invasive meter can find moisture with pinpoint accuracy or scan larger areas for accurate mapping. Easy to hold and simple to operate, it’s a user friendly device.

Two Detection Types

Use the Dri-Eaz Moisture Meter’s pin mode to test for moisture in materials like drywall or wood, or if you want know if a stain on a ceiling is still retaining moisture or has been repaired. Two sharp pins penetrate a maximum of 0.4 inches into surfaces. An electrical current passes between the 2 pins and the amount of resistance is relayed to you as a moisture reading.

For a quick survey of the moisture level in walls and floors, or to determine if there’s areas that may require further investigation, this sensor is also equipped with search mode. Also great for areas like wallpaper where inserting pins isn’t practical, it’ll emit electromagnetic signals to measure moisture content up to 0.75 inches below the surface.

Track Changes Over Time

In both modes, the Dri-Eaz SurveyMaster Moisture Meter is equipped with reference mode. Useful for seeing if remediation actions have been successful, original moisture level readings are stored and then subsequent readings will be displayed below the original so you can see if levels are above or below the original point.

User Friendly

Designed for maximum usability, this Dri-Eaz meter was engineered to be one of most easy-to-use moisture sensors available.

• Durable Construction: Constructed with rugged, durable materials, it’s built to handle the rigors of restoration site use.
• Lightweight: Weighing just 8 ounces and with a handy wrist strap, it can be comfortably held in the hand.
• Easy to Read: Its backlit display provides easy to see moisture readings.

Additional Features

• Battery Operated: Runs on a single included 9-volt battery.
• Touch Buttons: Unit power and modes are easily changed by pressing the large touch buttons.
• Programmable Settings: You can set your desired dry, wet, and at risk settings. When moisture levels exceed your preset settings, a buzzer will sound.
• Automatic Shut Off: To save battery life the detector can be programmed to automatically turn off between 1 and 6 minutes if a key press hasn’t been detected in that time.
• Low Battery Notification: Lets you know when it’s time to replace the battery.

Summary

Restoration professionals can safely detect moisture in a variety of surfaces with the Dri-Eaz SurveyMaster Moisture Meter.

What Customers Love

• Two-in-One Moisture Detection: Features pin mode for precisely detecting moisture in wood or flooring and search mode for less invasive moisture readings.
• Built to Last: With durable materials and construction it’s built to withstand constant use on job sites.

Things to Consider

• Sharp Pins: The auxiliary pins are sharp and care should be taken. When not in use, pins can be safely covered with the attached pin cap.